C381A Wire cut and stripping machine
Belt feed
C381A is attached the feeding Belt, based on C371A. It is suitable for the wire and cable that the surface has an irregularity.
Optional equipment available
C381A can attach the optional Mid Strip Unit CMS-801A2.
Optional equipment
CMS-801A2 Mid Stripping Unit
C381A with CMS-801A2 can strip at middle of wire with a outer diameter of up to 8φ, and up to 10 different position by easy setting on control panel. It can perform certain processing by 4 mid stripping blades.
Processing Capacity
※Processing condition: Front/Rear strip length 3mm, Speed 9, wire UL1007/AWG#22, thin wire mode
| Total Length | Processing Capacity | |||
| 100mm | 7,100 pcs/hour | |||
| 200mm | 6,550 pcs/hour | |||
| 300mm | 6,050 pcs/hour | |||
| 500mm | 5,250 pcs/hour | |||
| 1,000mm | 3,950 pcs/hour | |||
| 2,000mm | 2,700 pcs/hour | |||
| 3,000mm | 1,950 pcs/hour | |||
Specifications
Front/Rear : 0.1 ～ 47.9mm
0.1 ～ 99,999mm
±( 0.1 ＋ 0.0005 × L )mm
L ≧ 50mm
AWG #7(10sq) ～ #28(0.08sq) ※Depend on the wire type.
max φ11mm ※Depend on the wire type.
AVSS, VSF, IV, KV, UL, Teflon, etc
AC100 ～ 240V 50/60Hz
CMS-801A2 Mid Stripping Unit
430 x 450 x 270mm
27kg