C385A Cable cut and stripping machine
Belt feed
C385A is attached the feeding Belt, based on old model C375. It can measure more stable for the wire and cable that the surface has an irregularity than roller feed. It is a new model from C355, C375, C385.
Special R blade
C385A can use special R blade with cable guide that fitting the cable, so it can process cable stripping more stable than V blade.
Processing Capacity
※Processing condition: Front/Rear strip length 100mm, Front/Rear half strip length 50mm, Speed 9
| Total Length | Processing Capacity | |||
| 700mm | 891 pcs/hour | |||
| 1,000mm | 769 pcs/hour | |||
| 1,500mm | 628 pcs/hour | |||
| 2,000mm | 530 pcs/hour | |||
| 3,000mm | 405 pcs/hour | |||
Specifications
Front : max 1,500mm/Rear : max 210mm ※Half strip only
210 ～ 99,999mm
±( 0.1 ＋ 0.0005 × L )mm
L ≧ 210mm
AWG #7(10sq) ～ #28(0.08sq) ※Depend on the wire type.
max φ11mm ※Depend on the wire type.
ABS wire, Air bag wire, Shield cable, Cabtire cable, etc
AC100 ～ 240V 50/60Hz
0.06Nl/1 cycle 0.5MPa
none
716 x 430 x 266mm
44kg