C373A Wire cut and strip machine
Wide range
C373A can process the wide range from small to big wires and cables. It keep the quality for small wires as same as C371A, and more high power than it. It is a new model from C353, C373.
Optional equipment available
C373A can attach the optional Flat Cable Slit Unit CSL-503, and Mid Strip Unit CMS-801A2.
C373AF for Flat Cable
C373AF is the model for flat cable, based on C373A. It can process flat cable up to 40mm wide.
Optional equipment
CSL-503 Flat Cable Slitting Unit
C373A with CSL-503 can cut, strip and slit flat cable up to 40mm wide and total slitting length up to 200mm, and can adjust the ratio of front side and rear side slitting length by easy setting on control panel.
CMS-801A2 Mid Stripping Unit
C371A with CMS-801A2 can strip at middle of wire with a outer diameter of up to 8φ, and up to 10 different position by easy setting on control panel. It can perform certain processing by 4 mid stripping blades.
Processing Capacity
※Processing condition: Front/Rear strip length 3mm, Speed 9, wire UL1007/AWG#22, normal wire mode
| Total Length | Processing Capacity | |||
| 100mm | 2,300 pcs/hour | |||
| 200mm | 2,100 pcs/hour | |||
| 300mm | 1,950 pcs/hour | |||
| 500mm | 1,700 pcs/hour | |||
| 1,000mm | 1,300 pcs/hour | |||
| 2,000mm | 850 pcs/hour | |||
| 3,000mm | 650 pcs/hour | |||
Specifications
Front/Rear : 0.1 ～ 47.9mm
0.1 ～ 99,999mm
±( 0.1 ＋ 0.0005 × L )mm
L ≧ 50mm
AWG #2(30sq) ～ #28(0.08sq) ※Depend on the wire type.
max φ11mm ※Depend on the wire type.
AVSS, VSF, IV, KV, UL, Teflon, etc
AC100 ～ 240V 50/60Hz
9Nl/min 0.5MPa
CSL-503 Slitting Unit, CMS-801A2 Mid Stripping Unit
430 x 510 x 265mm
33kg